Pantera · settings for Epiphone Les Paul Standard + Line 6 Helix Floor (direct)
Threshold just above idle hiss, decay medium so held notes survive.
Graphic: +3 dB around 800 Hz-1 kHz, cut below 100 Hz (MXR six-band role).
Level 8 as clean boost (PQ-3 input boost role).
1-2 in from center, low cut 80 Hz, high cut 8 kHz.
Slight +2 dB at 3 kHz (PQ-3 role).
Going direct with Helix: PV Panama for the Randall's tight, fizzy solid-state high gain, graphic EQ blocks for the scooped mids, noise gate up front, bridge ProBucker. No E-Bow or Pandora flutter possible natively.
Loses the infinite, bowed sustain on held notes.
Workaround: Add Helix Compressor before the amp and let notes feed back near the speaker or monitor at volume.
Missing the short fluttering texture passage.
Workaround: Use the Helix Tremolo block with a fast, deep square wave on a footswitch.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker suggested, not confirmed for this solo; Champion identifies Bill Lawrence as Dimebag's longstanding bridge-pickup mainstay.
Washburn Dimebag signature → MXR Six Band Graphic EQ → Furman PQ-3 → Boss Noise Gate, model unknown → Randall RG-100 solid-state head
Estimated advanced difficulty; expressive control matters more than simply adding gain.
Every song already dialed in for the Line 6 Helix Floor.
Line 6 Helix Floor presets