Pantera · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
JCM800 through the High input, preamp cranked for saturated high gain, scooped-but-biting mids, big presence and treble for Dime's razor edge. Bridge ProBucker full up, dry — no modulation or reverb, just tight palm mutes.
Without a front-end boost the riff is slightly looser and less saturated than the record.
Workaround: Run the preamp at 9-10 on the High input and pick hard; roll bass slightly down to regain tightness.
Cranked JCM800 hiss blurs the sharp stops between riff hits.
Workaround: Mute with the palm and left hand on every stop; back off guitar volume between phrases.
Loses the subtle stereo thickening under the dry rhythm tracks.
Workaround: Skip it; the dry stack was the dominant sound and the flange was only blended underneath.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
Dean ML → Furman PQ-3 parametric EQ → MXR MX-109 Six Band EQ → Rocktron Guitar Silencer noise gate → MXR Flanger/Doubler (parallel amp path) → Randall Century 200 heads → Randall 4x12 cabinets
Notes are simple, but the picking-hand groove, muting precision and Dime's aggressive vibrato are what make it convincing.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings