Avenged Sevenfold · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
JCM800 High input, preamp cranked for the most saturation it can give, upper-mid push and tight bass to approximate the Uberschall lead channel. Bridge ProBucker full up, tone backed slightly. No pedals owned, so boost/delay/gate are workarounds.
Solo loses the spacious trailing ambience behind fast legato and sweeps.
Workaround: Play slightly more legato and hold bends longer; room volume gives some natural ambience.
Less midrange lift and sustain; lead sits closer to the rhythm level.
Workaround: Run preamp near max and keep bridge volume at 10; push Middle higher for the mid lift.
Audible hiss and squeal between phrases at this gain level.
Workaround: Mute with the picking-hand palm and left-hand fingers between phrases; roll bridge volume down in rests.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (Invader); Sustainiac used for sustained/feedback notes
Schecter Synyster Gates Custom (Invader bridge / Sustainiac) → Noise gate → MXR Boost/Line Driver → Delay → Bogner Uberschall 120W head → 4x12 cabinet with Vintage 30s
The lead is a showcase shred solo combining sweeps, fast scalar runs and melodic bends; speed and right-hand accuracy under heavy gain make it advanced.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings