Raito · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
JCM800 through the High input, cranked preamp for tight 80s high-gain crunch, bridge ProBucker. Without a boost or gate you rely on picking hand muting and a slightly scooped-but-present midrange to approximate Raito's dry, modern rhythm tone.
Riff will have looser low end and less pick definition than the record.
Workaround: Push preamp to 9-10 and drop bass to 4; mute hard at the bridge for tightness.
Hiss and string noise between stabs with the preamp this high.
Workaround: Mute idle strings with the fretting hand and palm; roll guitar volume back between phrases.
Loses the subtle width under the riff; tone stays dry and up-front.
Workaround: Leave dry; the original mix was nearly dry, so this is a minor loss.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Guitar (bridge humbucker) → Noise gate → Tight-boost overdrive → High-gain amp / amp sim → 4x12-style cabinet or cab IR
The riff is a quick, syncopated minor-key metal figure: the notes are not exotic, but the picking speed and mute accuracy needed to match the recording take practice.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings