Pantera · settings for Epiphone Les Paul Standard + Fender Mustang LT25
Placed before amp.
Light setting, minimal squash.
Dime's Randall riff on an LT25: pick Metal 2000 for tight solid-state-style high gain, bridge ProBucker full up, scooped-but-present EQ, built-in overdrive as the EQ/boost, no ambience. The 8-inch speaker limits thump, so lean on midrange bite.
Less of the hollow mid voicing and gain push into the amp
Workaround: Cut Middle to 4 and use the built-in overdrive at low drive, high level
More hiss and hum bleeding between chugs
Workaround: Mute with the palm and right-hand damping; roll off guitar volume in rests
Rhythm tone slightly narrower and less thick
Workaround: Flanger block at very low depth/mix if you want width, otherwise leave dry
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge (Bill Lawrence L-500XL)
Dean ML "Dean From Hell" (bridge L-500XL) → Furman PQ-3/PQ-4 Parametric EQ → MXR M-109 6-Band EQ → Rocktron HUSH noise gate → Randall RG100ES head → MXR Flanger/Doubler (effects loop, doubler mode) → Randall 412JB 4x12 cabinet
The riff itself is simple shapes, but Dime's picking attack, tight muting and harmonic squeals are what make it sound right.
Every song already dialed in for the Fender Mustang LT25.
Fender Mustang LT25 settings