Eric Johnson · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
Les Paul bridge humbucker into the JCM800's High input, treated as the always-on crunch rig: dark top, pushed mids, preamp doing the Tube Driver's job. No echo available, so the tone lands drier and more percussive than the record.
Loses the washy ambience and preamp warmth; lines sound dry and more attacky.
Workaround: Play in a live-sounding room, use slightly longer note sustain and vibrato to fill space; add a delay into the FX loop when you can.
Less compression and sustain; the JCM800 preamp is grainier and more aggressive.
Workaround: Lean on preamp 6 plus guitar volume for feel; pick lightly and use legato for sustain.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (ES-335); Strat sections use the bridge pickup with bridge/middle tone at 7
1963 Gibson ES-335 (bridge pickup) → Maestro Echoplex EP-3 → Paul C./Chandler Tube Driver → 1969 Marshall 1959 Super Lead 100W (channels jumpered) → Marshall 4x12 with Celestion G12-80s
The melody itself is approachable, but Johnson's bounce-picking, string-skipping triads and relentless note accuracy at tempo make a faithful version hard; the tone also leans on a cranked 100-watt non-master amp.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings