Eric Johnson · settings for Squier Stratocaster + Marshall JCM800 2203
No effects needed for this part.
JCM800 high input with moderate preamp gain and the master pushed gives a singing Marshall crunch close to EJ's Tube Driver-into-Plexi lead. Use the neck pickup with the tone slightly rolled off. Tape echo is missing.
Less smooth, compressed sustain; the JCM800 alone is edgier.
Workaround: Raise the preamp to about 7.5 and keep the guitar tone rolled back.
Loses tape-echo ambience that smooths the cascading runs.
Workaround: Play in a live room or add reverb at the mixing desk.
No thicker, compressed alternate lead voice.
Workaround: Raise the preamp and middle for a thicker voice.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: neck pickup (bridge for brighter passages)
Fender Stratocaster → BK Butler 911 Tube Driver → Dunlop Fuzz Face → Maestro Echoplex EP-3 → Marshall 100W Plexi / Super Bass → Marshall 4x12
A benchmark virtuoso solo; the moderate-gain rig hides nothing, so every note must be clean.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings