Architects · settings for Squier Stratocaster + Marshall JCM800 2203
No effects needed for this part.
JCM800 High input with preamp maxed gets hard-rock crunch, but low-output Strat singles fall well short of Rectifier metalcore saturation. A boost or tight overdrive in front is the key missing piece; bridge pickup, tight muting.
Without it, gain is too low and loose for modern metalcore chugs.
Workaround: Max preamp, use High input, pick hard and palm mute tightly.
Single-coils at max gain hum; stops won't be clean.
Workaround: Mute with fretting hand between chugs; face away from noise sources.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
Mayones Adam Christianson Signature Aquila Cardinal 6 → Fortin Amplification Tempest → Mesa/Boogie Dual Rectifier 100W head → Mesa/Boogie 4x12 OS Rectifier straight cab, Vintage 30s
The riff is rhythmic rather than technical, but it relies on tight muting and timing locked to a programmed backing.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings