Slipknot · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
Same amp as the record: JCM800 High input, preamp high, bridge ProBucker. Without an overdrive boost the low end is looser and gain slightly lower, so compensate with preamp and tighter bass. No gate or acoustic sim owned.
Less gain and a looser, flubbier low end on palm mutes.
Workaround: Preamp near max, bass down, play with tight picking.
Hiss and hum between palm-muted hits at high gain.
Workaround: Mute strings with fretting hand and roll volume off during rests.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
Ibanez MTM 'Stormtrooper' signature (Mick Thomson); Fender Jim Root Telecaster → Maxon OD-820 Overdrive Pro → Boss NS-2 Noise Suppressor → Marshall JCM800 2203 100W → 4x12 closed-back, Celestion Vintage 30s
Straightforward power-chord riffing; the challenge is tight muting and consistency at low tuning.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings