Arctic Monkeys · settings for Squier Stratocaster + Marshall JCM800 2203
No effects needed for this part.
JCM800 High input, pre-amp pushed for a thick mid-forward crunch, highs rolled back at the guitar to tame the bright ceramic single-coils. No pedals, so the riff's fuzz comes from the amp and the tremolo/delay shimmer is absent.
The signature gentle warble under the riff is gone; the tone sits static.
Workaround: Use a slight volume-swell rock with the picking hand or let the amp's natural compression breathe; otherwise accept a straight tone.
Loses the subtle ~120 ms slap thickening behind the riff.
Workaround: Lean on the amp's power-tube compression and play with a heavier, even attack to thicken notes.
Riff is drier and more upfront than the record.
Workaround: Play in a live-sounding room and mic further back; keep presence low so dryness reads as warm.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge (or bridge+middle) for bite on the low riff
1960s Vox Starstream XII 12-string → Coopersonic Valveslapper Dual-Valve Distortion → Boss DM-1 Delay Machine → Selmer Zodiac Twin 30 (tremolo + reverb) → Combo 2x12 speakers
Amp effects: tremolo (Gentle warble on the riff credited to the Selmer Zodiac's onboard tremolo; shallow depth, slow-to-medium rate), reverb (Ambience attributed to the Selmer (and/or the blended Magnatone); light, plus mix-stage reverb)
The notes are easy; nailing the laid-back pocket and the 12-string plus tremolo-and-fuzz texture is the real work.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings