Pantera · settings for Epiphone Les Paul Standard + Line 6 Helix Floor (direct)
Tight silence between stabs.
800Hz +8dB, 1.6kHz +10dB, 3.2kHz +8dB, 250Hz -3dB, Level +4dB.
Sag/Hum low for solid-state tightness.
SM57 off-axis, distance 2in, low cut 90Hz, high cut 7kHz.
Rate very slow, Depth 15%, Feedback 10%, Mix 15% - always on doubler.
Helix direct: PV Panama (5150) pushed by a mid-boosted graphic EQ to mimic Dime's stacked-EQ-into-solid-state bite, tight gate, 4x12 V30 IR, and a low-mix flanger/doubler for width. Bridge ProBucker, everything wide open.
Second stage of pre-amp mid boost and level push that helped the solid-state preamp saturate.
Workaround: Raise the Helix EQ block's level +3 to +5 dB and add a Scream 808 with drive low, level high, tone 7 as a second push.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge
Dean ML (bridge L-500XL) → MXR Six Band Graphic EQ → Furman PQ-3/PQ-4 Parametric EQ → Rocktron Hush noise gate → Randall RG100ES head → MXR M-126 Flanger/Doubler (rack, in loop) → Randall 4x12 cabinet
The riff demands fast, precise down/alternate picking and razor-tight muting; the groove's syncopation and Dime's pinch harmonics make it an advanced rhythm part.
Every song already dialed in for the Line 6 Helix Floor.
Line 6 Helix Floor presets