Pantera · settings for Epiphone Les Paul Standard + Neural DSP Quad Cortex (direct)
Threshold just above pickup hiss, fast release so staccato chugs cut off cleanly.
Low shelf +3 dB at 100 Hz.
100 Hz -3, 200 Hz -2, 400 Hz 0, 800 Hz +3, 1.6 kHz +4, 3.2 kHz +4, level +3 dB to push the amp.
Lead channel, pre gain 7, low 7, mid 4, high 6, presence 7, resonance 5, post to taste.
Dynamic mic on cap edge, low cut 80 Hz, high cut 8 kHz.
Rate very slow, depth 10%, feedback 0, mix 15% for faint doubling only.
Quad Cortex direct: Peavey 5150 model (closest tight high-gain to the Randall solid-state grind), parametric EQ pre-amp for low boost and 1 kHz cut, graphic EQ frown for upper-mid bite, tight gate, 4x12 V30 cab. Bridge humbucker, dry.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge
Washburn Dime ML with Bill Lawrence L500XL → Furman PQ-3 Parametric EQ → MXR Six Band Graphic EQ → Noise Gate → Randall RG100 head → MXR 126 Flanger/Doubler (effects loop) → Randall 4x12 cabinet
Riff is not fast but demands tight right-hand muting and groove accuracy.
Every song already dialed in for the Neural DSP Quad Cortex.
Neural DSP Quad Cortex presets