Plini · settings for Squier Stratocaster + Neural DSP Quad Cortex (direct)
Threshold set low, just enough to cut single-coil hum.
Moderate threshold, mix 70%.
+2 dB at 800 Hz, -2 dB at 3.5 kHz to tame ceramic brightness.
Dotted 8th synced to tempo, feedback 30%, mix 25%.
Going direct with the Quad Cortex: a Friedman BE-100 model pushed by a Klon-type boost, a compressor for legato smoothness, then dotted-8th digital delay and a plate/hall reverb. The Strat's bridge single-coil needs extra gain and a mid push to approach the humbucker lead.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker (lead), likely neck for softer phrases
.strandberg* Boden OS 6 Plini Limited Edition → Fractal Axe-Fx II (amp model, cabinet IR, delay block, reverb block) → DAW
Plini's leads need precise legato, tapping and rhythmic placement; the tone itself is forgiving but the playing is not.
Every song already dialed in for the Neural DSP Quad Cortex.
Neural DSP Quad Cortex presets