Mayhem · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
Epiphone Les Paul bridge humbucker into the JCM800's High input, preamp pushed for buzzsaw saturation. Without the SD-1/HM-2 stack you get a tighter Marshall grind instead of chainsaw fizz; scoop mids slightly and lift treble/presence for the cold Norwegian bite.
No chainsaw/buzzsaw fizz; tone is a tighter Marshall crunch instead.
Workaround: Max the JCM800 preamp on the High input and push treble/presence high for the closest buzz.
Less tightness and midrange push into the amp; low end can get loose at speed.
Workaround: Trim amp bass to 4.5 and pick closer to the bridge to keep riffs tight.
Loses the cold cavernous wash behind the riff.
Workaround: Play in a live, reflective room and let amp volume create natural ambience.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
Gibson Les Paul Standard (bridge humbucker) → Boss SD-1 Super Overdrive → Boss HM-2 Heavy Metal → Boss DD-3 Digital Delay → Marshall JMP 1987 50W head → Marshall 4x12 cabinet
Harmonically simple minor riffing, but long tremolo-picked passages demand steady wrist endurance and clean fretting to stay articulate under heavy gain.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings