Tame Impala · settings for Squier Stratocaster + Marshall JCM800 2203
No effects needed for this part.
No fuzz or modulation available, so the JCM800's High input does the saturation: moderate preamp with the neck pickup rolled back for a round, compressed psych lead. Expect a drier, harder-edged tone than the swirling studio original.
The lead's thick, synth-like saturation and sustain is the core of the sound; amp distortion alone is grittier and less compressed.
Workaround: Run the High input with preamp near 8, neck pickup, tone rolled back, and pick hard for maximum compression.
Without the phaser the lead loses its signature swirl and sits static in the mix.
Workaround: Use wide finger vibrato and slow volume-knob swells to add movement by hand.
Repeats and smear give the lead its depth; straight into the amp it sounds dry and small.
Workaround: Play slightly behind the beat and let notes ring to simulate the smeared tail.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Neck pickup (or both) for a round, vocal lead
Fender Jazzmaster → Phaser → Analog/tape-style delay → Fuzz Face (JDF2) → Overdrive (run last in chain) → Vox AC30H2 combo → Built-in 2x12 (Celestion-loaded combo) → Plate/hall reverb (mix)
The notes are moderate, but matching the fuzz-plus-modulation texture and the smeared, processed character is the hard part.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings