Rush · settings for Epiphone Les Paul Standard + Blackstar ID:Core 20 V3
Chorus, rate slow (~10 o'clock), depth/level around 60%.
Feedback low (2 repeats), level 20%.
Edge-of-breakup Hiwatt chime via ID:Core Crunch with British-leaning ISF, bridge ProBucker rolled back slightly, and the amp's mod block doing CE-1 duty plus a low-level delay for tape-echo depth.
Loses the extra flange shimmer layered under the chorus
Workaround: Push the amp mod depth slightly higher to fake the combined swirl
Chorus power chords hit with less push and sustain
Workaround: Switch to Super Crunch or raise guitar volume to 10 for heavier hits
Slightly less front-end push into the amp
Workaround: Add half a point of amp gain instead
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Gibson Howard Roberts Fusion → MXR Micro Amp → MXR Distortion+ → Boss CE-1 Chorus Ensemble → Electro-Harmonix Electric Mistress → Roland RE-301 Space Echo → Digital delay → Hiwatt DR-103/DR-504 head → Hiwatt 4x12 cabinet
The riff itself is not technically fast, but the 7/4 phrasing, wide stretched voicings and tapped harmonics demand accurate timing and a very specific chorused tone.
Every song already dialed in for the Blackstar ID:Core 20 V3.
Blackstar ID:Core 20 V3 settings