Radiohead · settings for Squier Stratocaster + Marshall JCM800 2203
No effects needed for this part.
The clean riff on a JCM800 means running the Low input with the gain backed off and leaning on the bridge single-coil for glassy bite. The signature octave-up Whammy shimmer can't be covered by any owned gear, so the riff will read as a dry clean figure.
Without it the riff loses its signature warbling octave-up shimmer and sounds like a plain clean figure.
Workaround: Play the riff an octave up on higher strings, or double it with another guitarist/loop an octave-higher pass.
Loud-section crunch must come from the amp instead of a pedal switch.
Workaround: Jump to the High input or push preamp to 7 for the loud bursts; the JCM800 is the same British voicing.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge
Fender Telecaster Plus (bridge) → DigiTech Whammy WH-1 (octave-up harmony) → Marshall ShredMaster (engaged only for loud sections) → Fender Eighty-Five combo, clean → 1x12 internal speaker, SM57
The riff itself is simple, but the signature sound depends on an octave-up pitch shifter and clean, even picking; the real challenge is the abrupt clean-to-distorted switching.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings