kessoku band · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
You have the amp the original emulates. Run the High input with the preamp pushed, mids forward, bridge ProBucker, and lean on master volume for power-tube feel. No boost pedal, so compensate with slightly more preamp gain.
Low end is less tight and the riff loses a little cut and compression at speed.
Workaround: Raise preamp to 8, keep bass at 5, and pick hard near the bridge for attack.
Rhythm sits drier than the record's slight ambience.
Workaround: Play in a live-sounding room; the riff is dense enough to mask dryness.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Gibson Les Paul (bridge humbucker) → Tube Screamer-style overdrive → Marshall-style high-gain head → 4x12 cabinet → studio plate/room reverb (mix)
The riff is harmonically simple (E, A, B, C#m, G#m) but the tempo and relentless picking demand right-hand stamina and clean muting.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings