Maná · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
Same amp as the original, so dial the 2203 for mid-forward crunch on the High input with the preamp pushed and master loud enough for power-amp sag. Bridge ProBucker, guitar tone rolled back slightly. No boost or delay pedals owned; the amp alone covers most of the lead sound.
Slightly less sustain and level lift; the solo may not jump above rhythm-level volume as much.
Workaround: Raise preamp to 7 and keep guitar volume at 10 for the solo; the 2203 reaches crunch on its own.
Sustained bends sound drier and a little less deep.
Workaround: Play dry; add generous vibrato on held notes to fake the extra sustain.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Les Paul-style guitar (bridge humbucker) → Overdrive/boost → Marshall JCM800 2203 head → Marshall 4x12 cabinet → Short delay (mix/outboard)
The solo is melodic rather than technical; the challenge is expressive bending, vibrato and staying in time over the busy rhythm track.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings