Scorpions · settings for Epiphone Les Paul Standard + Line 6 Helix Floor (direct)
Keeps the stabs silent between hits.
Tightens low end, no extra fuzz.
Mic 57 Dynamic, Distance 2.5in, Low Cut 90Hz, High Cut 6.5kHz.
+2dB at 800Hz Q1.0, -2dB at 350Hz, high cut 7kHz.
Studio plate, not a cave.
Helix direct: Brit 2204 (JCM800) pushed hard with a light 808 boost for tightness, 4x12 Greenback-style cab, plate reverb for 80s studio air, plus a short plate/tape ambience. Bridge ProBucker, volume full, tone rolled slightly back.
Loses the dramatic reverse swell heard only in the post-solo verse, not the main riff.
Workaround: Helix has no true reverse delay model here; use a Ping Pong delay swelled with volume pedal, or skip it.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
1958 Gibson Flying V (bridge humbucker) → Marshall 100W head (JMP/JCM800-type) → Marshall 4x12 cabinet → Studio mic + reverse tape echo on post-solo verse (mix)
The riff shapes are simple power chords, but the groove depends on strict downstrokes and clean muting between hits to keep the stabs tight.
Every song already dialed in for the Line 6 Helix Floor.
Line 6 Helix Floor presets