GOJIRA · settings for Epiphone Les Paul Standard + Marshall MG30GFX
At zero: FX Level · Reverb
No effects needed for this part.
Use OD2 on the MG30GFX with the Les Paul's bridge ProBucker, mids kept present and gain moderate for tightness. Play dry with no effects. A noise gate is the key missing piece; the overdrive boost is approximated by trimming bass and gain.
Less low-end tightness and pick snap in front of the gain
Workaround: Lower bass slightly and keep gain around 7 rather than maxing it.
Hiss and hum ring through the stop-start rests
Workaround: Mute the strings with your fretting hand and roll the volume off between takes.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge (EMG 81)
Charvel Joe Duplantier signature prototype (San Dimas Style 2 HH) → KHDK No.1 Overdrive → Boss NS-2 Noise Suppressor → EVH 5150III 100W head → 4x12 cabinet, model undocumented, single Shure SM57
Riff is mid-tempo and repetitive but needs precise muting, consistent down-picking and controlled scrapes.
Every song already dialed in for the Marshall MG30GFX.
Marshall MG30GFX settings