Gary Moore · settings for Epiphone Les Paul Standard + Line 6 Helix Floor (direct)
Gain to unity, gentle sustain help.
Filter 2 o'clock (treble rolled), Level to push amp slightly.
+5 dB at 750 Hz Q 1.0, -2 dB at 3.5 kHz, high cut 7 kHz.
Master/channel vol moderate.
Stereo width wide.
380 ms, 2 repeats, Mix 12%.
Helix direct: Brit J45 set clean, with a Vermin Dist plus mid-pushed EQ standing in for the Guv'nor. Neck ProBucker, tone rolled slightly back, Tri Chorus faint for Dimension D width and a plate reverb for the studio ambience.
No exact Guv'nor model; Vermin Dist is tighter and less Marshall-voiced in the low mids.
Workaround: Run Vermin Dist into Brit J45 and add a parametric EQ block boosting 700-800 Hz to rebuild the mid hump.
Chorus block wobbles slightly more than the pitch-stable Dimension D.
Workaround: Use the Tri Chorus with depth very low and mix under 20% for width without audible wobble.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Neck humbucker for most of the solo, bridge for part of it
1959 Gibson Les Paul Standard (neck PAF) → Marshall The Guv'nor Mk I → Marshall JTM45 Reissue head → Marshall 1960B 4x12 with EVM12L speakers → Roland SDD-320 Dimension D (studio, post/stereo)
The notes are not fast, but the expression is: intonated bends, a signature slow wide vibrato and dynamic control make it hard to sound convincing.
Every song already dialed in for the Line 6 Helix Floor.
Line 6 Helix Floor presets