Van Halen · settings for Epiphone Les Paul Standard + Positive Grid Spark 40
Flanger model, rate slow (~0.3-0.5 Hz), depth 60%, feedback/regen 60-65%, manual mid.
Slapback model, time ~80 ms, feedback low, mix ~10%.
Room/plate, mix ~12%, decay short.
Threshold low-moderate, fast release.
Plexi-style crunch on the Spark's Crunch voicing with gain near max, bridge ProBucker full up, and the Mod block set to a slow wide flanger for the riff's jet sweep. Tune a whole step down to D standard.
Spark's flanger is close but lacks the M-117's deep regeneration and hand-swept manual control.
Workaround: Set Spark flanger slow and wide with high feedback; let the sweep land on the riff's first half.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
Frankenstrat-style guitar (bridge humbucker) → MXR M-117 Flanger → Maestro Echoplex (tape slapback) → Marshall 1959 Super Lead 100W (Variac-lowered voltage, all knobs cranked) → Marshall 4x12 Greenback cabinet
The notes are simple, but nailing the groove, the pick attack and the flanger sweep placement is what makes it sound right.
Every song already dialed in for the Positive Grid Spark 40.
Positive Grid Spark 40 settings