Metallica · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
JCM800 High input, cranked preamp with mids pulled back to approximate the Mesa's 750 Hz scoop. ProBucker bridge pickup wide open. No pedals, no ambience: dry, tight, palm-muted chug.
Without the 1.2 kHz notch the JCM800 stays more mid-forward and less scooped than the record.
Workaround: Pull Middle to ~2.5 and raise Presence/Treble; roll guitar tone slightly if it gets nasal.
Palm-mute attack is less even and less studio-tight.
Workaround: Use very consistent downpicking depth and steady muting pressure for natural evenness.
No stereo detune width; single guitar sounds narrower.
Workaround: Double-track the riff if recording; live it is inaudible anyway.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (EMG 81)
ESP Explorer-style guitar (EMG 81 bridge) → ADA MP-1 preamp (blended layer) → Mesa/Boogie Mark IIC++ head → Aphex EQF-2 EQs (effects loop) → Aphex CX-1 compressor (effects loop) → Eventide H3000 (mix-stage widening) → 4x12 cabinets
The riff is slow enough to be approachable, but the groove depends on precise muting and even picking attack to sound heavy.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings