Superheaven · settings for Epiphone Les Paul Standard + Blackstar ID:Core 20 V3
Room type, level 1-2 of 10.
Fuzz-wall riff with no fuzz pedal: use OD2 at near-max gain, ISF toward British for low-mid weight, bridge humbucker full up with tone backed slightly. A 20W modeling amp gets the saturation but not the woolly Big Muff scoop.
Without it the tone is amp distortion, tighter and less woolly/scooped than the record.
Workaround: OD2 at gain 9 with ISF 6 and tone knob at 7 approximates the saturation and low-mid weight.
Loses the stacked second-layer sustain of the doubled rhythm wall.
Workaround: Let the amp's gain carry it and play with firm, even palm mutes for density.
Slightly less front-end push and tightness.
Workaround: Raise amp gain a notch and keep guitar volume at 10.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge pickup (neck or both for the cleaner verse arpeggios)
Fender Jazzmaster → MXR Micro Amp M133 → Way Huge Swollen Pickle MkIIs Jumbo Fuzz → Electro-Harmonix Big Muff Pi → Hiwatt Custom 100 (DR103) head → 4x12 cabinet with Celestion Vintage 30s
The riff itself is easy; the challenge is the tuning, the right fuzz saturation and tight, even picking so the low notes stay defined.
Every song already dialed in for the Blackstar ID:Core 20 V3.
Blackstar ID:Core 20 V3 settings