Avenged Sevenfold · settings for Epiphone Les Paul Standard + Blackstar ID:Core 20 V3
2-3 repeats, level low (about 25%).
Bogner Uberschall lead translated to the ID:Core's OD2 voice: tight mid-forward high gain, bridge ProBucker, and the amp's own delay for the solo smear. Studio polish and 4x12 thump are beyond 20W, but the character carries.
Less solo lift, sustain and front-end tightness than the record.
Workaround: Raise amp gain slightly and pick harder; keep bridge volume at 10.
Hum and string noise between phrases at this gain level.
Workaround: Mute with the palm and fretting-hand fingers; roll bridge volume back during rests.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (Invader); neck/Sustainiac for sustained bends
Schecter Synyster Gates Custom (Invader bridge) → MXR MC401 Boost/Line Driver → Noise gate → Delay → Bogner Uberschall 120W head → 4x12 cabinet with Vintage 30s → Studio reverb (mix)
Synyster Gates' lead mixes rapid picked runs with arpeggiated shred phrasing; clean execution needs strong picking-hand sync and controlled vibrato at speed.
Every song already dialed in for the Blackstar ID:Core 20 V3.
Blackstar ID:Core 20 V3 settings