Pantera · settings for Epiphone Les Paul Standard + Line 6 HX Stomp (direct)
Threshold just above hiss, decay fast.
Parametric: -7 dB at 650 Hz Q 1.2, +3 dB at 100 Hz, level +3 dB into amp.
Mic 57 dynamic, distance 2 in, low cut 90 Hz, high cut 7.5 kHz.
Rate very slow, depth 10%, feedback 0, mix 20% for width not swoosh.
+1 octave voice, mix 25%, engage only on final held squeal.
+3 dB shelf at 3.5 kHz, high cut 8 kHz to tame fizz.
Dime's Randall-through-scooped-EQ lead, rebuilt in the HX Stomp going direct: PV Panama for solid-state-ish tight high gain, EQ block doing the Furman/MXR mid scoop, gate for hiss, subtle flanger doubler and a Pitch block for the stacked squeal ending.
The parametric sweep and output push are central to the scooped, brittle Dime voicing.
Workaround: Use two HX EQ blocks: one pre-amp parametric cut at 500-800 Hz with level pushed, one post for 3-4 kHz bite.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge
Dean ML (bridge Bill Lawrence L-500XL) → Dunlop Cry Baby Wah → Furman PQ-3 Parametric EQ → MXR Six-Band Graphic EQ → Rocktron Hush 2-B / Boss NF-1 noise gate → MXR M-126 Flanger/Doubler → DigiTech Whammy (solo ending only) → Randall RG-100ES head → Randall 4x12 cabinet
The notes are not fast, but the solo lives on Dime's vibrato, bend intonation and squeal placement; nailing the feel and the layered ending is the hard part.