Dokken · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
JCM800 2203 is a close relative of the hot-rodded Plexi sound. Use the high input, generous preamp, and the bridge ProBucker. Without a Tube Screamer boost, the low end is looser and saturation a bit lower. Tape echo is missing.
Less tightness and saturation; the low end is flubbier on palm mutes.
Workaround: Cut bass, raise middle and preamp, and pick hard and close to the bridge.
A little ambience and thickness under the riff is lost.
Workaround: Play dry; the riff is mostly dry anyway.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
ESP superstrat (Tiger/Kamikaze-era) or Charvel/Kramer, Floyd Rose, bridge humbucker → TS808 Tube Screamer (as boost) → Echoplex EP-2 tape echo → Lee Jackson-modded Marshall Plexi 100W, blended with a Randall RG-series head → Marshall 4x12 with Celestion Greenbacks
Riff is mostly power chords and palm-muted eighths, but the record's punch comes from precise muting and tight stereo doubles.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings