Metallica · settings for Epiphone Les Paul Standard + Marshall DSL40CR
At zero: Gain · Volume · Reverb
No effects needed for this part.
Ultra Gain OD1 on the DSL40CR with the tone-shift scoop gets close to the Mark IIC+ chug. Bridge ProBucker, guitar wide open, no reverb, tight bass and strong treble for palm-muted downstrokes.
Less of the surgical 750Hz scoop and low-end tightening that defines the album tone.
Workaround: Use the DSL's tone shift button with middle near 3 and bass at 4 to approximate the V curve.
Missing the classic V curve that tightens lows and adds sizzle.
Workaround: Tone shift engaged plus presence 6 and resonance 5 gets a similar curve.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Gibson Flying V (bridge humbucker) → Mesa/Boogie Mark IIC+ preamp → B&B/Aphex EQF-1 parametric EQ (amp effects loop) → Mark IIC+ onboard graphic EQ → Modded 100W Marshall JCM800 power amp → Marshall 4x12 cabinet
The riff is harmonically simple but physically brutal: near-continuous 8th-note downstrokes at ~212 BPM with precise muting, which is the main barrier for most players.
Every song already dialed in for the Marshall DSL40CR.
Marshall DSL40CR settings