Metallica · settings for Epiphone Les Paul Standard + Vox AC30C2
At zero: Volume · Reverb · Tremolo Speed · Tremolo Depth
No effects needed for this part.
An AC30 can't reach Mark IIC+ thrash saturation, so this is a loud, edge-of-meltdown Top Boost crunch: volume past noon, Tone Cut nearly off for treble bite, bass trimmed for tight chugs. Expect crunch, not scooped high gain.
Without a 750 Hz mid scoop plus low/high boost, the AC30's midrange honk dominates and the riff lacks thrash tightness.
Workaround: Pull bass to 3 and Tone Cut near 0 for a crude V-curve; roll guitar tone slightly to tame honk.
No second stage of low tightening and presence lift, so palm mutes sound looser and less sharp.
Workaround: Use treble at 8 and bass at 3 on the Top Boost channel as a single-stage approximation.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Gibson Flying V (bridge humbucker) → Mesa/Boogie Mark IIC+ preamp → B&B/Aphex EQF-1 parametric EQ (amp effects loop) → Mark IIC+ onboard graphic EQ → Modded 100W Marshall JCM800 power amp → Marshall 4x12 cabinet
The riff is harmonically simple but physically brutal: near-continuous 8th-note downstrokes at ~212 BPM with precise muting, which is the main barrier for most players.