Deftones · settings for Epiphone Les Paul Standard + Fender Frontman 10G
No effects needed for this part.
Bridge ProBucker into the Frontman's overdrive channel, bass up and treble up for a scooped-ish chug. A 10W solid-state combo can't do cranked 4x12 weight, so aim for tight percussive attack and tame the fizz.
Loses the extra grind and saturated edge layered over the preamp distortion.
Workaround: Run amp gain near max with full guitar volume and dig in hard for added grit.
Riff hits lose some sub-octave weight under the low string.
Workaround: Let the 10-inch-less combo go; emphasize low string attack and keep bass knob high.
Slightly drier, flatter rhythm sound than the record.
Workaround: The track is nearly dry anyway; play in a live-sounding room.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: bridge humbucker
ESP Stephen Carpenter signature (Seymour Duncan JB bridge) → Boss OC-2 Octave → Boss FZ-2 Hyper Fuzz → A/DA MP-1 tube preamp → Rocktron Intellifex → Marshall 9200 power amp → Marshall 1960 4x12 cabinet
The riff itself is easy to fret; the challenge is groove placement, muting the drop-tuned low string cleanly and matching the heavy, even attack.
Every song already dialed in for the Fender Frontman 10G.
Fender Frontman 10G settings