Ozzy Osbourne · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
JCM800 bridge-humbucker crunch standing in for the Variac'd Super Lead plus Distortion+. Preamp around 6 on the High input gives the mid-forward, tight grind; master as loud as allowed for feel.
Loses the mid-forward front-end push; amp gain alone is flatter and looser.
Workaround: Run the High input with preamp around 6 and middle 7 to mimic the mid hump.
Rhythm sounds narrower and drier than the wide studio image.
Workaround: Double-track the riff if recording, or just play it dry live.
Less precise 1kHz presence and no clean level boost.
Workaround: Middle at 7 and presence at 6 cover most of the shaping.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Gibson Les Paul Custom / polka-dot Flying V (bridge pickup) → Dunlop Cry Baby Wah → MXR Distortion + → MXR Ten Band Graphic EQ → Marshall JMP 1959 Super Lead 100W (Variac) → Marshall 1960A 4x12 with Altec 417-8H → AMS DMX 15-80S delay/detune (console)
The riff is not harmonically hard, but the relentless palm-muted tempo and quick power-chord moves demand clean, even picking and stamina.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings