Korn · settings for Epiphone Les Paul Standard + Line 6 HX Stomp (direct)
Kills hum between stop-start slams.
Parked around 60% toe, mix 100% — only on for the intro pedal-tone figure.
Always on under the riff.
Block mix ~25% for thickening only.
1.5 in, 3 deg off-axis, low cut 80 Hz, high cut 8 kHz.
-4 dB at 500 Hz, +2 dB at 100 Hz, high cut 9 kHz.
HX Stomp direct: Cali Rectifire on a modern high-gain voice, Scream 808 in front for tight low chug, cocked wah for the nasal intro figure, 4x12 cab and an EQ to scoop and thicken. Bridge ProBucker, tone rolled slightly back.
Quiet clean moments are narrower than the record's widened intro.
Workaround: Add the HX Stomp Chorus block at low depth only if you also build a clean patch for sparse sections.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
Ibanez Universe UV7 (bridge humbucker) → Dunlop Cry Baby wah → Ibanez TS9 Tube Screamer → Electro-Harmonix Big Muff Pi → Ibanez BC-9 Bi-Mode Chorus → Mesa/Boogie Dual Rectifier head → Mesa/Boogie 4x12 cabinet
The notes are simple two-finger power-chord shapes, but the groove, mute control and the quiet-to-loud dynamic swing carry the part.