Muse · settings for Epiphone Les Paul Standard + Boss GX-100 (direct)
Level unity - evens tremolo picking only.
Level unity into amp block.
Level unity.
Mic condenser, position off-center, low cut 90Hz, high cut 7.5kHz.
+2dB at 800Hz, -3dB at 250Hz, -2dB at 4.5kHz.
Release fast - tightens the stabs.
Level unity, on for sustained chords.
Studio plate, not a room.
Going direct with the GX-100: Diezel Stack into a 4x12 IR, Muff Fuzz in front for the spitty gated saturation, noise gate for tight stabs, and a slow phaser sitting under the sustained chords. Bridge ProBucker, volume wide open.
The Muff Fuzz model lacks the Fuzz Factory's oscillating, velcro-gated spit and stab control.
Workaround: Run Muff Fuzz with low sustain into the Diezel model and use a fast noise gate to fake the gating.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
1962 Gibson SG / Manson DL-1 → ZVex Fuzz Factory (onboard) → MXR Phase 90 (onboard) → Diezel VH4 head (blended with Vox AC30) → 4x12 cabinet
The guitar part is rhythmically simple but demands right-hand endurance and clean muting at high gain to stay tight against the bass hook.