Muse · settings for Epiphone Les Paul Standard + Boss Katana (50/100 MkII, Gen 3)
At zero: Fx · Delay
Red/Fuzz-type variation, level moderate, high drive.
Phaser variation, rate slow, depth low.
Room, short decay, low mix.
Brown-mode Katana with the booster block pushed hard stands in for the Diezel-plus-Fuzz-Factory wall. Bridge ProBucker, tone rolled slightly back, mids forward, tight bass for tremolo-picked sixteenth-note stabs.
Loses the gated, spitty sputter on top of the amp gain; booster gives smoother saturation.
Workaround: Use the Katana booster in its fuzz variation at high drive and roll guitar tone to 7 for grit.
Minor; only a subtle sweep under sustained parts.
Workaround: Katana Mod block set to phaser, slow rate, shallow depth.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
1962 Gibson SG / Manson DL-1 → ZVex Fuzz Factory (onboard) → MXR Phase 90 (onboard) → Diezel VH4 head (blended with Vox AC30) → 4x12 cabinet
The guitar part is rhythmically simple but demands right-hand endurance and clean muting at high gain to stay tight against the bass hook.
Every song already dialed in for the Boss Katana (50/100 MkII, Gen 3).
Boss Katana (50/100 MkII, Gen 3) settings