Muse · settings for Epiphone Les Paul Standard + Marshall JCM800 2203
No effects needed for this part.
JCM800 High input, cranked preamp for a thick mid-forward wall; bridge ProBucker with tone backed slightly to mimic the gated fuzz stabs. No fuzz on hand, so the amp alone carries the saturation.
Loses the spitty, gated, compressed fuzz edge on the chord stabs; amp gain alone is smoother.
Workaround: Run preamp near maximum on the High input and palm-mute hard for a gated attack; keep guitar volume full.
Sustained parts lack the subtle swirl under the chords.
Workaround: Skip it; the effect is low in the mix and the part reads fine dry.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
1962 Gibson SG / Manson DL-1 → ZVex Fuzz Factory (onboard) → MXR Phase 90 (onboard) → Diezel VH4 head (blended with Vox AC30) → 4x12 cabinet
The guitar part is rhythmically simple but demands right-hand endurance and clean muting at high gain to stay tight against the bass hook.
Every song already dialed in for the Marshall JCM800 2203.
Marshall JCM800 2203 settings