Avenged Sevenfold · settings for Squier Stratocaster + Boss Katana (50/100 MkII, Gen 3)
At zero: Mod · Reverb
Mid Boost / Treble Booster variation, level ~4, around 10 o'clock.
Graphic EQ: cut 100Hz ~3dB, boost 800Hz ~3dB.
Digital/stereo delay, ~400ms, feedback low, mix ~20%.
Katana in Brown mode with a boost for Synyster Gates' saturated lead. Bridge single-coil needs extra gain and mid push; delay block covers the rack delay. Tighten lows, lift mids, keep reverb off as the original had none.
Octave-up squeals and dive accents around the lead cannot be reproduced.
Workaround: Use natural harmonics plus aggressive bends/vibrato for the squeal moments.
Katana Brown mode is tighter but less compressed than the signature pedal's saturation.
Workaround: Boost block in front plus gain 7.5 approximates its compression and sustain.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (Invader) for the solo
Schecter Synyster Gates Custom-S (bridge Invader) → Original Syn distortion → DigiTech Whammy → Graphic EQ → Schecter Hellwin USA 100 head → Digital delay (rack/post) → 4x12 cabinet
A typical Synyster Gates lead: quick sweeps, legato runs and jazz-tinged note choices at a brisk tempo, demanding clean right-hand sync and muting.
Every song already dialed in for the Boss Katana (50/100 MkII, Gen 3).
Boss Katana (50/100 MkII, Gen 3) settings