LINKIN PARK · settings for Epiphone Les Paul Standard + Boss Katana Mini
No effects needed for this part.
Brown voicing on the Katana Mini with the bridge ProBucker gets a compressed, scooped nu-metal chug. The 7W speaker can't deliver Recto low-end, so lean on tight muting and a scooped EQ; delay stays off since the riff was dry.
Hiss and hum fill the silences between the staccato stabs, blurring the groove.
Workaround: Mute with the picking-hand palm and left-hand fingers immediately after each stab; back the gain to 7 if hiss is bad.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
PRS Custom 24 (bridge humbucker) → Boss NS-2 Noise Suppressor → Mesa/Boogie Dual Rectifier (Modern channel) → Mesa/Boogie Recto 4x12 cabinet
The riff is simple single-note and power-chord stabs; the challenge is tight muting, silence between hits and nailing the groove, not the fretting.
Every song already dialed in for the Boss Katana Mini.
Boss Katana Mini settings