LINKIN PARK · settings for Epiphone Les Paul Standard + Marshall DSL40CR
At zero: Gain · Volume · Reverb
No effects needed for this part.
Ultra Gain OD2 with the tone-shift scoop gets close to the Recto's saturated, mid-scooped chug. Bridge ProBucker, tight bass, moderate gain so drop-tuned stabs stay percussive rather than mushy.
High-gain hiss and string noise fill the silences between riff stabs.
Workaround: Mute with the palm and fretting-hand fingers the instant each stab ends; roll bridge volume down during long rests.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
PRS Custom 24 (bridge humbucker) → Boss NS-2 Noise Suppressor → Mesa/Boogie Dual Rectifier (Modern channel) → Mesa/Boogie Recto 4x12 cabinet
The riff is simple single-note and power-chord stabs; the challenge is tight muting, silence between hits and nailing the groove, not the fretting.
Every song already dialed in for the Marshall DSL40CR.
Marshall DSL40CR settings