LINKIN PARK · settings for Epiphone Les Paul Standard + Vox AC30C2
At zero: Volume · Reverb · Tremolo Speed · Tremolo Depth
No effects needed for this part.
An AC30 cannot reach Dual Rectifier saturation, but cranking the Top Boost volume into power-tube clip with the bridge ProBucker gets a thick British crunch. Expect less scoop and less chug; a distortion pedal is the real missing link.
AC30 crunch is far less saturated and compressed; chugs will sound loose and open rather than tight and scooped.
Workaround: Crank volume_tb past 8, use bridge pickup at full volume, and pick hard; palm-mute heavily to fake tightness.
Silence between stabs is harder to get; a cranked AC30 hums and the riff's rests fill with noise.
Workaround: Mute with the right palm and left-hand fingers immediately after each stab; roll bridge volume down between sections.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
PRS Custom 24 (bridge humbucker) → Boss NS-2 Noise Suppressor → Mesa/Boogie Dual Rectifier (Modern channel) → Mesa/Boogie Recto 4x12 cabinet
The riff is simple single-note and power-chord stabs; the challenge is tight muting, silence between hits and nailing the groove, not the fretting.