John Mayer · settings for Squier Stratocaster + Fender Frontman 10G
No effects needed for this part.
Clean Frontman 10G, overdrive switch off, middle pickup, modest volume so the 10W stays just shy of breakup. Brighter ceramic pickups mean rolling treble back and using the tone knob to restore warmth. No delay or reverb available.
Loses the thickness and gentle grit pushing the amp on harder picking.
Workaround: Nudge gain to 5 and dig in with the pick; back off guitar volume for cleaner passages.
Riff and fills sound drier and flatter with no tail.
Workaround: Let notes ring into each other and use vibrato for sustain; play in a reflective room.
Part sits dry and close instead of in a soft room.
Workaround: Play in a live-sounding room; add reverb at the recording stage if tracking.
This page assumes a Squier Stratocaster with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Middle single-coil
Fender Black1 Stratocaster (middle pickup) → Klon Centaur → Analog delay → Two-Rock Custom Reverb Signature (with amp reverb) → Two-Rock 2x12 cabinet
Amp effects: reverb (The Two-Rock Custom Reverb Signature has onboard tube-driven reverb; a small amount suits the track's ambience, though studio plate/room reverb was likely added in the mix.)
The riff itself is intermediate, but the tone depends on picking dynamics and precise bend/vibrato control; any sloppiness is obvious at this low gain level.
Every song already dialed in for the Fender Frontman 10G.
Fender Frontman 10G settings