Tame Impala · settings for Fender Precision Bass + Hartke HD25
No effects needed for this part.
Direct P-Bass thump recreated on the Hartke: flat-ish EQ with lifted low-mids, highs rolled off at the guitar, and right-hand palm muting standing in for the foam mute and DI compression.
Notes are less even and sustain less; the hook loses its glued, steady pulse.
Workaround: Play with very consistent pick/finger attack near the bridge and keep amp volume moderate so the solid-state stage adds slight natural limiting.
Low end is narrower and drier than the record's subtly washed bass.
Workaround: Leave it dry; at 15% blend it is barely audible live, and small-speaker reverb muddies the low end anyway.
Less transformer warmth and mild grit on note attacks.
Workaround: Nudge amp volume up slightly for a touch of solid-state compression and warmth.
This page assumes a Fender Precision Bass with no pedals. Adapt it to your exact rig, pedals included.
Pickup: P-Bass split-coil (single pickup), played with pick or fingers near the bridge mute
Fender Precision Bass (foam mute) → dbx 560A compressor → Reverb → Acme Audio Motown DI WB-3 → Console / DAW (no amp or cab)
Tabbed as intermediate; the notes are not hard, but nailing the damped, evenly compressed groove and the pocket is the real work.