Pantera · settings for Epiphone Les Paul Standard + Marshall CODE 25
Depth/width low, rate slow, mix ~25% in the app.
Light amount, used for attack tightening.
Dimebag's brittle, scooped high-gain riff tone on a CODE 25: JCM800 model, bridge ProBucker, treble and presence-heavy EQ with cut lower mids, built-in flanger set as a subtle doubler, no reverb.
Without the external mid-scoop and 1.6-3.2 kHz boost the tone is less brittle and cutting.
Workaround: Use the amp's middle at 3 and treble at 8.5, and the app's EQ-style tweaks in the preset.
Loses the extra 3-4 dB front-end push and low-mid trim.
Workaround: Raise amp gain slightly and keep middle low to mimic the push.
High-gain hiss between riff stabs is not silenced.
Workaround: Mute with the picking hand and roll off the guitar volume during rests.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (L-500XL); neck pickup for the clean intro/verse figures
Dean ML 'Dean From Hell' (Bill Lawrence L-500XL bridge) → Furman PQ-3 Parametric EQ → MXR M-109 Six Band Graphic EQ → Rocktron/Boss noise gate → MXR M-126 Flanger/Doubler → Randall RG100ES head → Randall 4x12 cabinet
Amp effects: chorus (Only on the clean sections tracked through the Roland JC-120's stereo chorus; not on the heavy riff)
The riff itself is rhythmically straightforward, but nailing the tight muting, the harmonic squeals and the clean/heavy contrast takes control.
Every song already dialed in for the Marshall CODE 25.
Marshall CODE 25 settings