Pantera · settings for Epiphone Les Paul Standard + Vox AC15C1
At zero: Volume · Reverb · Tremolo Speed · Tremolo Depth
No effects needed for this part.
An AC15 with no drive pedal cannot reach Randall solid-state razor gain. Crank the Top Boost channel for maximum tube saturation, bridge ProBucker full up, scoop nothing (AC15 is mid-forward), and accept a hairier, less brittle approximation of the heavy riff.
No way to scoop 400 Hz or push 1.6-3.2 kHz, so the riff stays mid-forward and Vox-chimey instead of razor-scooped.
Workaround: Set amp treble high and Tone Cut low, roll bass slightly, and pick nearer the bridge for added bite.
Without the 3-4 dB front-end push the AC15 won't saturate into tight high gain.
Workaround: Run Top Boost volume at 9 with master around 4 so the preamp clips on its own.
Loses the subtle widening/thickening that was on all the time.
Workaround: Play with very even attack; the AC15's natural chime partly substitutes for the shimmer.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (L-500XL); neck pickup for the clean intro/verse figures
Dean ML 'Dean From Hell' (Bill Lawrence L-500XL bridge) → Furman PQ-3 Parametric EQ → MXR M-109 Six Band Graphic EQ → Rocktron/Boss noise gate → MXR M-126 Flanger/Doubler → Randall RG100ES head → Randall 4x12 cabinet
Amp effects: chorus (Only on the clean sections tracked through the Roland JC-120's stereo chorus; not on the heavy riff)
The riff itself is rhythmically straightforward, but nailing the tight muting, the harmonic squeals and the clean/heavy contrast takes control.