Pantera · settings for Epiphone Les Paul Standard + Positive Grid Spark 40
At zero: Delay · Reverb
Threshold medium, fast release.
Flanger, depth/width low, rate slow, mix ~25%.
Clean/EQ boost model, gain low, level +3 dB, tone mid-high.
Dimebag's brittle Randall riff tone on a Spark 40: Metal voicing with a Rectifier/SLO-style model, scooped low-mids, spiky presence, bridge ProBucker, tight gate and a near-invisible doubler-style mod.
Less of the scooped-yet-spiky Dime sizzle and cut.
Workaround: Use the amp Mid at 3 and Treble at 8, plus an EQ block in the Spark app if available.
Slightly less focused 500-800 Hz cut and front-end tightness.
Workaround: Low-gain drive block as a level boost plus Mid at 3.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (L-500XL); neck pickup for the clean intro/verse figures
Dean ML 'Dean From Hell' (Bill Lawrence L-500XL bridge) → Furman PQ-3 Parametric EQ → MXR M-109 Six Band Graphic EQ → Rocktron/Boss noise gate → MXR M-126 Flanger/Doubler → Randall RG100ES head → Randall 4x12 cabinet
Amp effects: chorus (Only on the clean sections tracked through the Roland JC-120's stereo chorus; not on the heavy riff)
The riff itself is rhythmically straightforward, but nailing the tight muting, the harmonic squeals and the clean/heavy contrast takes control.
Every song already dialed in for the Positive Grid Spark 40.
Positive Grid Spark 40 settings