Ozzy Osbourne · settings for Epiphone Les Paul Standard + Fender Champion 20
No effects needed for this part.
Les Paul bridge humbucker into the Champion 20's British voicing with gain pushed high for a tight, midrange-forward Rhoads bite. No pedals, so the amp does all the drive; treble up, bass trimmed to keep the galloping riff articulate rather than woolly.
Without it the amp alone gives less sustain and a softer, less focused attack.
Workaround: Push amp gain to 7.5 in British mode and pick hard near the bridge for bite.
No 500Hz mid hump, so leads cut less and the Champion has no mid knob at all.
Workaround: Use British voicing (mid-forward) and keep bass low to leave midrange exposed.
Loses the wide, doubled-sounding thickness of the stacked tracks.
Workaround: Play dry; the amp's chorus at low FX Level can hint at width if desired.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker
1974 Gibson Les Paul Custom (bridge pickup) → MXR Distortion + → MXR Ten Band Graphic EQ → Marshall JMP 1959 Super Lead 100W (Input I, high-treble) → Marshall 4x12 cabs with Altec 417-8H speakers → AMS DMX 15-80S Digital Delay (console, short delay/detune)
The solo demands clean fast picking, accurate position jumps and controlled vibrato at tempo; the composed, classically flavored lines leave little room to fake phrasing.
Every song already dialed in for the Fender Champion 20.
Fender Champion 20 settings