Van Halen · settings for Epiphone Les Paul Standard + Marshall CODE 25
Slow rate (~20%), depth moderate, mix around 50%.
Level low (~15%).
Plate/hall type, medium decay, mix ~20%.
Light amount (~25%).
Plexi model on the CODE 25 with gain pushed for power-tube-style saturation, bridge ProBucker full up, slow phaser and short slapback delay plus light plate-style reverb. Mid-forward 'brown sound' at low wattage, tuned down a half step.
The closing low warbling octave-drop tail cannot be reproduced; final harmonic ends dry.
Workaround: Use the amp's pitch block briefly set to -12 on the last harmonic, or dive the harmonic with the bar.
Barely audible on the record; little change in perceived tone.
Workaround: Leave the CODE flanger off; the phaser already supplies the sweep.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (the guitar's only pickup)
Frankenstrat (bridge PAF) → MXR M117 Flanger → MXR Phase 90 → Maestro Echoplex EP-3 → Univox EC-80A tape echo (final note) → Marshall 1959 Super Lead 100W on Variac → Marshall 4x12 cabinet → Studio plate reverb (mix)
A benchmark virtuoso piece: sustained tapping triplets, aggressive bar work and rubato phrasing demand advanced technique, and the tone itself needs heavy power-tube compression to make the legato speak.
Every song already dialed in for the Marshall CODE 25.
Marshall CODE 25 settings