Van Halen · settings for Epiphone Les Paul Standard + Marshall DSL40CR
At zero: Gain · Volume
Plexi 'brown sound' via the DSL's Classic channel Crunch mode pushed hard: bridge ProBucker, mids forward, presence up, master as loud as allowed for power-tube compression. A touch of amp reverb stands in for the studio plate; phaser and slapback are the missing pieces.
Loses the signature slow swirl and upper-mid lift in the tapping section
Workaround: Lean on mids/presence for the nasal edge; no built-in modulation on this amp
No short slapback thickening or preamp sparkle on the legato runs
Workaround: Play into the FX loop-less front with slightly higher presence; accept a drier tone
Final harmonic lacks the descending warbling growl
Workaround: Use a slow whammy-bar dive on the last harmonic to imitate the pitch drop
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (the guitar's only pickup)
Frankenstrat (bridge PAF) → MXR M117 Flanger → MXR Phase 90 → Maestro Echoplex EP-3 → Univox EC-80A tape echo (final note) → Marshall 1959 Super Lead 100W on Variac → Marshall 4x12 cabinet → Studio plate reverb (mix)
A benchmark virtuoso piece: sustained tapping triplets, aggressive bar work and rubato phrasing demand advanced technique, and the tone itself needs heavy power-tube compression to make the legato speak.
Every song already dialed in for the Marshall DSL40CR.
Marshall DSL40CR settings