Van Halen · settings for Epiphone Les Paul Standard + Vox AC30C2
At zero: Volume · Tremolo Speed · Tremolo Depth
2.5 of 10, short wash.
An AC30 can't be a cranked plexi, but Top Boost pushed hard with both ProBuckers' output gives thick, mid-forward crunch. Volume near max, Master set for room level, Tone Cut tamed to keep the bite without fizz. Phaser and slapback are the big gaps.
Loses the signature slow swirl and upper-mid honk through the tapping section.
Workaround: Nothing onboard swirls; lean on bridge-pickup midrange and vibrato-arm movement for motion.
No short slapback thickening or tape-preamp mid push, so notes sound drier and thinner.
Workaround: Nudge amp reverb slightly up for a touch of thickening instead of delay.
The closing descending growl after the final harmonic can't be reproduced.
Workaround: End on the 12th-fret harmonic and drop it with a slow vibrato-bar dive.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Bridge humbucker (the guitar's only pickup)
Frankenstrat (bridge PAF) → MXR M117 Flanger → MXR Phase 90 → Maestro Echoplex EP-3 → Univox EC-80A tape echo (final note) → Marshall 1959 Super Lead 100W on Variac → Marshall 4x12 cabinet → Studio plate reverb (mix)
A benchmark virtuoso piece: sustained tapping triplets, aggressive bar work and rubato phrasing demand advanced technique, and the tone itself needs heavy power-tube compression to make the legato speak.