Rage Against the Machine · settings for Epiphone Les Paul Standard + Marshall DSL40CR
At zero: Gain · Volume
JCM800 boost-channel crunch from the DSL40CR's Ultra Gain OD1 mode, mids pushed hard, tone shift off. Neck humbucker (coil split) approximates the Telecaster neck thump for the drop-D riff; gain backed off since ProBuckers outrun single-coils.
The swirling sweep on the opening sustained chord is absent.
Workaround: Let the chord ring dry and use a slow volume swell for movement.
No clean level lift for lead lifts.
Workaround: Raise Ultra volume slightly and dig in harder with the pick.
This page assumes a Epiphone Les Paul Standard with no pedals. Adapt it to your exact rig, pedals included.
Pickup: Neck single-coil for the main riff
1982 Fender Telecaster (neck pickup, drop D) → Marshall JCM800 2205 boost channel input → FX loop: Ibanez DFL Flanger → FX loop: DOD FX40B EQ boost → FX loop: DigiTech Whammy WH-1 (solo only) → Peavey 4x12 with Celestion G12K-85
Amp effects: reverb (The JCM800 2205 has onboard spring reverb; Morello's documented setting is about 7, though live FOH ambience dominates)
The notes are simple; the challenge is groove, muting accuracy and dynamic control between the quiet and full-gain passages.
Every song already dialed in for the Marshall DSL40CR.
Marshall DSL40CR settings